|
r e g i s t e r
e d u s e r s
|
| How
to: Windows
CE |
| |
Use the directions below to create a dial-up connection for
the
Windows CE operating system.
|
| 1] |
Tap My Handheld PC, then Program Files, followed by Communications.
|
| 2] |
Double-tap Remote Networking. Double-tap Make New Connection.
Note:
If your modem is not inserted, insert it now.
|
| 3] |
Type
"BAMnet" in the Type a name for the connection
box. Select "Dial-Up Connection" under Connection
Type. Tap Next to continue.
|
| 4] |
Select
the appropriate modem from the list on the left. Enter
Country code (for U.S., enter 1), Area Code, and Phone number. Make sure the box for Use country code and area code is checked.
Visit our Dial-Up
Number page and choose your desired dialup number.
Notes:
If dialing our U.S. 1-800 modem number, enter 800 as
the area code, then 737-7530 as the telephone number. If
dialing one of our non-800 style numbers (see
list), use the calling format that works for the area
you are in. For example, if no area code is required when
dialing, you might only need XXX-XXXX as the number to dial.
Each country/state have their own calling formats. For more
information on calling patterns including access from Hotels,
visit our Helpful Tips section in the upper right corner
of this page.
|
| 5] |
Tap TCP/IP. Make sure Server assigned IP address, Server-assigned name server addresses, Use software
compression, and Use IP header compression are
all checked. Make sure Log on to network is unchecked.
Tap OK in the upper-right part of the screen. Tap Finish to complete the process.
|
| 6] |
Test
the connection by dialing up.
Where do I
find the BAMnet connection?
Tap My Handheld
PC, then Program Files, then Communications,
then Remote Networking. Tap the connection for BAMnet.
Enter your user name and password, tap Connect.
Note: Add "@bamnet"
to the end of your user name. For example username@bamnet.
Important: do not add ".com"
to the end of @bamnet - this will not work!
Once connected,
always remember to disconnect when finished using the Internet!
|
| |
|
| What
do I do now? Upon a successful modem connection,
open the built-in Internet browser, or configure your device
for email, and start using the Internet. When finished browsing,
please remember to disconnect from BAMnet.
|
[return
to main page]
Copyright
© 2007 BAMnet Corporation. |
