|
r e g i s t e r
e d u s e r s
|
| How
to: Windows
NT 4.0 |
| |
Use the directions below to create a dialup connection for
the
Windows NT 4.0 operating system.
|
| 1] |
Check
Modem Installation
a.
Click on the Start menu.
b. Click on Settings.
c. Click on Control Panel.
d. Double-click Modems.
If
you see that your modem is already listed, skip to step
#2 below.
e.
Click on Add to install your modem.
f. Click Detect Modem to let Windows NT automatically
find and install the modem drivers. If you have a driver
diskette specific for your modem with Windows NT drivers,
select the option to use Manufacturer's Drivers.
g. If Windows NT does not identify a COM port, select the
appropriate port from the list. If during your dialup there
is no response from the modem, go back to this configuration
and choose the other COM port.
h. When your modem is listed, Click OK.
|
| 2] |
Setting
up BAMnet Dialup Session
a.
Double-click the My Computer icon (an icon on your
desktop).
b. Double-click the Dial-Up Networking icon.
If Dial-Up Networking has not been
installed, choose the option to install. If Dial-Up Networking
is installed but no Phonebook entries have been created,
choose the option to add an entry.
c. When prompted for session name, type BAMNET.
d. Place a check in the boxes for "I am calling the
Internet" and "Send my plain text password…"
e. Enter number to be dialed.
f.
Click Finish to complete the process.
Visit our Dial-Up
Number page and choose your desired dialup number.
Notes:
If dialing our U.S. 1-800 number, enter the entire
number as 1-800-737-7530. If dialing one of our non-800
style numbers (see
list), use the calling format that works for the area
you are in. For example, if no area code is required when
dialing, you might only need XXX-XXXX as the number to dial.
Each country/state have their own calling formats. For more
information on calling patterns including access from Hotels,
visit our Helpful Tips section in the upper right corner
of this page.
|
| 3] |
Configure
Dialup Session
There
is nothing to configure. Upon a successful connection, your
dialup session receives the proper IP Address information.
Your BAMnet dialup session is now ready for use.
|
| What
do I do now? Now that you created the connection,
test it by dialing into BAMnet. Upon a successful modem
connection, open either Microsoft Internet Explorer or Netscape
and start browsing the Internet. When finished browsing,
please remember to disconnect from BAMnet.
|
[return
to main page]
Copyright
© 2007 BAMnet Corporation. |
